GUNITE W1508 Mounting Stud X1.5 .750

( Brand: Gunite ), ( Manufacturer Part Number: W1508 ), ( Part Type: Mounting )

Review GUNITE X1.5 And .750 Mounting Stud fits M22 X1 750 2016

The W1508 M22 x 1.5 750 16 mounting stud is an essential component in the installation of Gunite or Shotcrete systems. This mounting stud is specifically designed to provide a secure and reliable anchoring point for the application of these protective coatings.

The stud measures 1.5 inches in diameter and 7.5 inches in length, with a thread pitch of M22. The stud's length ensures adequate penetration into the substrate, while its diameter provides a stable base for the Gunite or Shotcrete application. The M22 thread pitch is standard in the industry and is compatible with most Gunite or Shotcrete spraying equipment.

Each stud comes with a 16-thread length, which allows for a greater number of anchor points to be installed per linear foot compared to shorter studs. This can lead to time and cost savings during the installation process.

The W1508 M22 x 1.5 750 16 mounting stud is manufactured from high-quality steel, ensuring strength and durability. The stud's surface is coated with a protective zinc coating to prevent corrosion and ensure a long service life.

The stud's 16-thread length also allows for the use of standard-size nut and washer assemblies, which can be easily sourced from most hardware stores or construction supply outlets. This can help simplify the installation process and reduce the need for specialty parts.

Overall, the W1508 M22 x 1.5 750 16 mounting stud is a versatile and reliable solution for anchoring Gunite or Shotcrete applications. Its standard thread pitch, length, and diameter make it a widely-used component in the industry, and its high-quality steel construction and protective coating ensure a long service life.

Gunite W1508 M22 x1.5 750 16 mounting studs are used for attaching gunite or shotcrete finish to structural supports. Here are some pros and cons of buying these studs for your project:

1. High Strength: These studs are designed to provide a strong bond between the gunite finish and the supporting structure. They have a tensile strength of 150,000 psi and a yield strength of 75,000 psi.

2. Corrosion Resistance: The studs are made of steel with a zinc coating to prevent rusting and corrosion. This is especially important in wet or humid environments where gunite is commonly used.

3. Easy to Install: The studs come with a 16-inch center-to-center spacing and are easy to install using standard tools. They can be set in place with grout or concrete and then covered with gunite.

4. Durable: Gunite is known for its durability, and these studs help ensure that the finish lasts for many years. They are resistant to impact, fire, and chemicals.

1. Cost: Gunite studs can be more expensive than other types of fasteners due to their high strength and corrosion resistance.

2. Availability: These studs may not be readily available at local hardware stores and may need to be ordered from a specialty supplier.

3. Handling: Due to their size and weight, these studs can be difficult to handle and transport to the job site.

Gunite W1508 M22 x1.5 750 16 mounting studs are a reliable and effective solution for attaching gunite finish to structural supports. Their high strength, corrosion resistance, and ease of installation make them a worthwhile investment for projects where durability and longevity are important. However, their cost and availability may be a consideration for some projects, and their size and weight can make handling and transportation challenging. Ultimately, the decision to use these studs will depend on the specific requirements of your project and your budget.

If you are planning a project that requires the use of gunite or shotcrete finish, I would recommend considering the use of Gunite W1508 M22 x1.5 750 16 mounting studs. While they may be more expensive than other types of fasteners, their high strength, corrosion resistance, and ease of installation make them a worthwhile investment for ensuring the longevity and durability of your finish. Be sure to order them in advance to ensure availability, and plan for the extra handling and transportation requirements.

Details:

Designed specifically for trucks, trailers, and buses. Gunite W1508 M22 X1.5 .750 16 Mounting Stud Gunite: Part Number: Manufacturer. Engineered using the latest technology to ensure product lasts longer in service. Made of high-quality components for durability, reliability, and performance.

Manufactured following strict OE standards to work like the original component. Engineered with a factory-like design for effortless installation, ensuring perfect match your vehicle.

part #: w1508 price

• $59.26

specifications fastenerface:

• for models: M22, X1, 750
• for years: 2016
• brand: Gunite
• mpn: W1508
• part type: Mounting

payments fastenerface:

• other
• credit card: Visa
• wallet: Paypal

offer fastenerface:

• options: Ship-to-home
• started: November 10, 2025
• best offers: True
• availability: In Stock
• sold: 0
• quantity: 5

returns fastenerface:

• time: 30 Days
• paid by: Seller
• policy: Returns Accepted

shipping fastenerface:

• type: Fixed
• class: Standard
• cost: $0.00
• transit: 3-7 Days
• service: Standard

seller fastenerface:

• # reviews: 58071
• city: Los Angeles, California
• rating: 98.7%

general fastenerface:

• Car Truck Parts Accessories > Wheels, Tires Parts > Wheel Nuts, Bolts Studs
• condition: New